KD-X444LP

Product:

Key Digital KD-X444LP 4K HDMI over 70m CAT5e/6 Extender Set

Description:

Extends 4K/18G HDMI over 70m CAT5e/6 with HDR, Surround Audio, IR or RS-232

Main Features:

- 4K/18G HDMI Extension over over single CAT5e/6 
- Carries surround audio: Dolby®, DTS™
- Extends IR or RS-232 for controlling remotely located equipment
- Power over CAT (PoC), only one power supply is needed

Intro:

Key Digital® KD-X444LP is a 4K/UHD 18Gbps, HDMI over CAT5e/6 Transmitter plus Receiver set for extension of digital video signals with the latest standards in resolution, HDR, and Chroma over a single CAT cable.
KD-X444LP extends video resolutions up to 4096x2160 at 60hz with 4:4:4 chroma sub-sampling over a single CAT5e/6 cable up to 230ft (70m) or up to 328ft (100) when using CAT6A STP cabling. The Transmit unit features an HDMI pass-thru port for integration with local monitors or AV Receivers.
In addition to HDMI AV, KD-X444LP carries IR or RS-232 for controlling remotely located equipment. An IR sensor and IR emitter are included with the IR Input port also supporting Serial IR input directly from a control system / IR block. With Power over CAT (PoC), only one power supply is needed, and it may be connected at either unit for ease of installation.

Features:

- Single CAT5e/6 UTP/STP Extension: Fully automatic equalization, and amplification depending on cabling length
- Power over CAT (PoC), only one power supply is needed, and it may be connected at either unit for ease of installation
- Low Profile: Super slim chassis design 
- 4K/UHD (18G) extension over CAT5e/6: Up to 230ft / 70m; CAT6A STP: Up to 328ft / 100m 
- 1080p extension over CAT5e/6: Up to 230 ft / 70m; CAT6A: Up to 328ft / 100m 
- 10G Pass-thru: Mode enables uncompressed 10.2Gbps signal extension 
- IR Sensor: Sensor powering via +5V on IR In ports collects line-of-sight IR from remote(s) without external IR connecting block 
- Up/Down IR: Two channels of IR enable control to/from devices or control systems connected to Tx and Rx units 
- RS-232: Bi-Directional control to/from Tx and Rx unit


Additional Features:

- HDR10 (High Dynamic Range): More life-like images through a greater range of luminance levels
- HDCP 2.2: Compliancy up to HDCP 2.x and backward compliant 
- Deep Color Support: Up to UHD/4K 30Hz 4:4:4/12 bits or 60Hz 4:4:4/8 bit 
- Full Buffer Technology: Key Digital’s proprietary suite of EDID, HDCP, TMDS, and HPD management to overcome Pro AV installation obstacles. 
- EDID Management: Internal library with 14 internal EDID handshakes including 4K with HDR in addition to native EDID data copied from CAT5e/6 or HDMI pass-thru outputs
- HDCP Authentication: HDCP sources are authenticated by HDCP key on transmit unit, for one-to-one topology
- Hot Plug Detection Control: Enables integrator to choose if active signal voltage is forced to connected display/output device
- TMDS Re-Clocking: Re-generation of TMDS (AV signal) channel data at Transmit unit for brand new AV signal
- Surround Audio Support on HDMI Pass-Thru: Dolby®, Dolby® TrueHD, DTS™ and DTS-HD™ (formats up to 7.1)
- Surround Audio Support on CAT5e/6 Output: Dolby®, DTS™ (formats up to 5.1/6.1)
